Rock Exotica Kootenay Ultra, Knot Passing Pulley
The Kootenay Ultra is very light and compact but still has the same knot passing capacity of the original. It has two extra holes that can be used for hoist lines, in addition to the standard tag line holes. This is extremely useful in many situations. And it has the best method ever devised for locking the sheave should you need a high strength tie-off.
Rock Exotica Omni Block 2.6 Single Pulley with Integrated Swivel
The Omni 2.6 brings heavy duty rigging to the Omni family with a Working Load Limit (WLL) of 20kN. In addition to the large 66mm sheave, the P55 features a prusik minding sideplate, and push-button access to open the sideplate to install rope.
Heightec Vantage 5:1 Locking Casualty Pulley
5:1 Locking Casualty Pulley - 1.5m long, for transferring a casualty onto a rescue system without cutting connections.
Petzl Spin L1 Swivel Pulley
The Petzl Spin L1 can be opened even when attached to the anchor, this pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The large diameter sheave mounted on sealed ball bearings gives it excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of karabiners, ropes or slings.
Petzl Spin L1 Swivel Pulley
The Petzl Spin L1 can be opened even when attached to the anchor, this pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The large diameter sheave mounted on sealed ball bearings gives it excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of karabiners, ropes or slings.
Petzl Spin L1D Swivel Pulley
The Petzl Spin L1D is a very high efficiency single pulley with one-way rotation and swivel, it can be opened even when attached to the anchor, this pulley is designed to be used in conjunction with a descender for maximum simplicity in setting up a deviation for a heavy load. The faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of karabiners, ropes or slings.
Petzl Spin L2 Double Swivel Pulley
The Petzl Spin L2 can be opened even when attached to the anchor, this pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The two parallel-mounted sheaves and auxiliary attachment point allow the pulley to be used for setting up various types of complex haul systems. The large diameter sheaves mounted on sealed ball bearings provide excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of karabiners, ropes or slings.
Petzl Spin L2 Double Swivel Pulley
The Petzl Spin L2 can be opened even when attached to the anchor, this pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The two parallel-mounted sheaves and auxiliary attachment point allow the pulley to be used for setting up various types of complex haul systems. The large diameter sheaves mounted on sealed ball bearings provide excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of karabiners, ropes or slings.
Petzl Trac Guide Trolley
Easy to install in-line pulley designed for adventure parks. Featuring an ergonomic captive karabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the karabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers. For use on both wire or rope 9-13mm.
Petzl Eject Friction Saver
Adjustable friction saver for tree care that is easily retrievable from the ground and has an integrated pulley. It offers multiple setup configurations.
heightec Basic Lifting Kit - Complete lifting kit for hauling
Complete lifting kit for hauling including specialist hauling pulley.
heightec Advanced Lifting and Lowering Kit
Complete kit for rigging and light lifting.
Singing Rock Pulley Small - RK800
Small pulley for those who occasionally need to build simple hauling systems or manipulate with the objects. Essential gear for glacier tours in case of crevasse rescue.
Singing Rock PULLEY TWIN - RK802
Large twin pulley for those who need great hauling efficiency, durability and light weight.
Available in Orange or Black.
ISC Medium Aluminium Single Pulley
This ISC RP032 is a lightweight Aluminium Eiger pulley made from high-strength aluminium. Manufactured with bushings for high loads at low speed. Bushings offer great performance in lightweight applications.
Petzl Twin Release Double Progress Capture Pulley
The Twin Release progress capture pulley is designed to set up 4:1 haul systems for work in confined spaces or for technical rescue. Releasing the cam is possible with the ergonomic handle. The brake integrated into the moving side plate and the main faceted sheave with single-direction rotation, offer additional braking and better control when lowering heavy loads. The two sheaves provide excellent hauling efficiency. The swivel facilitates operations, allowing the pulley to be oriented under load and direct connection of carabiners, ropes, or slings.
Petzl Reeve Carriage Transport Pulley
The Petzl Reeve combines two pulleys and a rigging plate as an intergrated solution designed to simplify setting up rescue systems on tensioned highlines.
Harken Wingman Mechanical Advantage System
The Harken Wingman is a high efficiency ball bearing pulley system that can be used as a 4:1 or 5:1 mechanical advantage (flip orientation to rig either way). The Wingman Can be released smoothly under full load with one hand. (Please see video below)
Edelrid Kaa Adjustable Lanyard
The KAA is a prefabricated haul system for tensioning systems or lifting people during rescues. In addition, as the KAA is certified to EN 354, it can be used for workplace stabilisation, as a restraint system (open/closed), and for controlled lowering. Its strap-based construction makes it the most compact and lightweight system on the market. Depending on the positioning, it offers a 4:1 or 5:1 lifting ratio with an efficiency of 91 %. The KAA is packaged compactly but ready for immediate use, so that no valuable time is lost when it is required. A swivel is provided at each end to prevent the system from twisting. The hand lever on the draw cord makes it easier to pull and can also be used as a lowering lever. The KAA is available in three lengths: 0.8, 1.5 and 4 m.
Petzl Naja - Friction Saver
Friction saver for tree care that is easily retrievable from the ground, with an integrated pulley and a strap with different adjustment positions.
Designed for tree care, the Naja friction saver allows the work rope to be set up without damaging the tree. The strap has four different adjustment positions to adapt to different branch diameters. Rope ascents and movement in the tree are optimized due to the high-efficiency pulley which facilitates rope glide at the anchor. The included retrieval ball makes the system easily retrievable from the ground.
Petzl Strap For Naja Friction Saver
This strap is specially designed for the Naja adjustable friction saver. It can be used to replace the original strap or link two straps together to lengthen the friction saver and enable work on larger-diameter trees. It is available in two lengths: 150 and 250 cm.
Designed for tree care, the Naja friction saver allows the work rope to be set up without damaging the tree. The strap has four different adjustment positions to adapt to different branch diameters.
Petzl Retrieval Ball For Naja Friction Saver
With a diameter of 21 mm, this retrieval ball is specially designed for the Naja adjustable friction saver. It enables quick and easy system retrieval from the ground.
CT Climbing Technology Up Lock Double Captive Pulley
Double locking pulley, designed for the creation of an auto-blocking rescue winch in combination with the Up Roll pulley.
CT Climbing Technology Orbiter L Triple Pulley
The Orbiter L Tripe Pulley from Climbing Technology has mobile side plates which are very versatile, robust and has the provision for two connectors through the upper eyelet.
Petzl Pro Traxion Pulley With Swivel 2023
The Petzl Pro Traxion is a very high-efficiency, drop-resistant progress-capture pulley with swivel.
Rock Exotica Hydra Triple Attachment Pulley
The Hydra is a triple attachment pulley which features a swivel-top connection to facilitate the pulley's use on the saddle bridge, and for use in climbing systems. Rubber o-rings line the connection points to assist in holding carabiners tightly to avoid dangerous cross-loading.
TerrAdaptor Steel Sheave Assembly
The TerrAdaptor Cable Sheave Assembly is specifically designed for use with the TerrAdaptor Portable Anchor System and the TerrAdaptor Cable Winch Bracket that allows you to utilize many of the commonly used cable winch systems.
Harken Snatchet 65 Block
This product’s name says it all. Snatchet pushes together the ease and familiarity of carabiner rigging with a high-efficiency pulley to create a very flexible piece of powerful, yet compact, lifting equipment.
Harken Snatchet 65 Ratchet Block
This product’s name says it all. Snatchet pushes together the ease and familiarity of carabiner rigging with a high-efficiency pulley to create a very flexible piece of powerful, yet compact, lifting equipment.
Singing Rock Tandem Pulley
The Singing Rock double pulley for Tyrolean traverses and zip-lines with two stainless steel sheaves.
Pulleys for use in rope access and rescue, arboriculture (tree cutting), mountaineering and caving and water rescue.
A guide to the Conformity Standards:
| EN362 | Personal protective equipment against falls from a height. Connectors. |
| EN795 | Personal fall protection equipment. Anchor devices. |
| EN12275 | Mountaineering P.P.E. standard: rock climbing, climbing walls, caving, canyoning. |
| EN12278 | Mountaineering equipment. Pulleys. Safety requirements and test methods. |
| EN12841 | Personal fall protection equipment. Rope access systems. Rope adjustment devices. |
| ANSI Z359.14:2014 | Safety Requirements For Self-Retracting Devices For Personal Fall Arrest And Rescue Systems. |
| EAC | EurAsian Conformity marking confirms full compliance with the “Basic Safety Requirements”, which are specified in the Technical Regulations. |
Buying Guides
We know that sometimes you need a little help with choosing the product that's right for you. We also know the typical questions our customers ask - so we've put together this comprehensive collection of buying guides, where we hope you'll find the answers buy clicking here.