Edelrid Adjustable Belay Station Sling
The Edelrid Adjustable Belay Station Sling has an easy length adjustment without knotting that can weaken the material, two anchor points can be attached with even tension to provide 22 kN breaking strength, can be used as an adjustable personal belay point, étrier, or block sling protection.
Petzl Coeur Bolt Stainless Steel 10mm hanger plate – 20 pack
The Petzl Coeur Bolt Stainless Steel 10mm hanger plate is designed for outdoor environments not aggressive enough to cause Stress Corrosion Cracking (SCC). Pack of 20
Petzl Coeur Goujon Complete Stainless Steel anchor assembly 12mm - 20 Pack
Multi-directional, Stainless steel hanger plate with expansion bolt 12mm, with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20
Petzl Coeur Bolt HCR Stainless Steel 12mm hanger plate – 20 pack
The Petzl Coeur Bolt HCR Stainless Steel 12mm hanger plate is designed for aggressive outdoor environments likely to cause Stress Corrosion Cracking (SCC).
Lyon 25mm Nylon (Polyamide) Sewn Sling (Flat Tape)
Nylon 25 mm textile slings are the workhorse of our textile anchor selection. Used throughout the work and rescue sectors, these slings enable anchors to be quickly created around a variety of natural and artificial features. The endless loop construction is manufactured from 25 mm wide nylon webbing, sewn using a five bar computer controlled stitch pattern.
Tractel Rollbeam Push Travel Trolley
The Tractel Rollbeam Push Travel Trolley is designed to be easily fitted to a wide range of beams and can be used as an anchor for suspended access such as rope access.
Lyon 25mm nylon sling with protective sleeve
The nylon sleeve which is sewn into place provides additional protection from abrasion in high wear areas. Conforming to EN795B for anchorage devices these slings are perfect for making temporary rope anchors.
Tractel Rollclamp Personal Portable Anchor
The Tractel Rollclamp (Dover Clamp) anchorage device is designed to provide safety against falling for persons working on RSJ (H or I beam) metal structures and is intended for use with a lanyard with shock absorber or a Blocfor retractable lanyard.
Petzl Coeur Steel Hanger 10mm - 20 Pack
Multi-directional, steel hanger plate 10mm with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl Coeur Steel Hanger Plate 12mm - 20 Pack
Multi-directional, steel hanger plate 12mm with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl Coeur Stainless Steel Hanger 12mm - 20 Pack
Multi-directional, stainless steel hanger plate 12mm with anti-rotation system. Stainless steel designed for typical exterior use. Pack of 20
Spanset Attachment Sling 1m
Spanset 50mm polyester sling surrounded with a protective tubular sleeve. This sling has been designed and tested to be part of a fall arrest system; this means that the sling is strong enough to be used to secure your equipment to the structure in the event of a fall.
Petzl Anneau Polyester Slings 18mm Wide
Petzl Anneau Polyester open loop slings 18mm wide are designed for setting up or extending belay or anchor point. Available in four lengths 60cm, 80cm, 120cm and 150cm.
Petzl Anneau Polyester Slings 18mm Wide
Petzl Anneau Polyester open loop slings 18mm wide are designed for setting up or extending belay or anchor point. Available in four lengths 60cm, 80cm, 120cm and 150cm.
Petzl Anneau Polyester Slings 18mm Wide
Petzl Anneau Polyester open loop slings 18mm wide are designed for setting up or extending belay or anchor point. Available in four lengths 60cm, 80cm, 120cm and 150cm.
Petzl Anneau Polyester Slings 18mm Wide
Petzl Anneau Polyester open loop slings 18mm wide are designed for setting up or extending belay or anchor point. Available in four lengths 60cm, 80cm, 120cm and 150cm.
Petzl Coeur HCR (High Corrosion Resistance) Hanger 12mm - 20 Pack
Multi-directional, HCR (High Corrosion Resistance) hanger plate 12mm with anti-rotation system. HCR steel designed for ultra-corrosive environments. Pack of 20.
Petzl Coeur Goujon Complete steel anchor assembly 10mm - 20 Pack
Multi-directional, steel hanger plate with expansion bolt 10mm, with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl Coeur Goujon Complete steel anchor assembly 12mm - 20 Pack
Multi-directional, steel hanger plate with expansion bolt 12mm, with anti-rotation system. Standard steel designed for interior uses or non-permanent installations. Pack of 20
Petzl St'anneau Dyneema sling
A lighter alternative to the all-nylon slings, these are colour coded for ease in length identification.
IMPORTANT NOTICE: These are EN795 PPE Anchor Strops NOT EN13414 lifting slings.
Lyon Wire Anchor Strops
Made from 7mm galvanised steel, complete with eyelet ends and plastic protective sleeve.
IMPORTANT NOTICE: These are EN795 PPE Anchor Strops NOT EN13414 lifting slings.
Lyon 7mm Stainless Steel Wire Anchor Strop
The stainless steel wire slings / strops have the same physical dimensions and handling properties as the galvanised versions, but with reduced spark potential and increased corrosion resistance.
Lyon Anchora
The Lyon Anchora is an anchor device that is designed with climbing walls and technical training centres in mind. The Anchora has five attachment points designed to allow different connecting and loading configurations.
DMM Talon Ground Anchor
The DMM Talon is a steep earth / ground anchor suitable for a variety of applications, made from lightweight aluminium.
Rock Exotica Enforcer Loadcell
The Rock Exotica Enforcer is a compact aluminium load cell that measures force up to 20 kN. Utilizing two sampling modes, the Enforcer is able to monitor systems and log drop testing in high resolution. Unique features like Bluetooth connectivity and swivel attachment points separate the Enforcer into a class of its own.
IMPORTANT NOTICE: For use with iPhone IOS operating system only, (The app is not available on Android).
Petzl Collinox 10 mm resin anchor - Pack of 10
The Petzl Collinox is a 10mm diameter forged stainless steel anchor designed for long-term installation. Textured stem for better application and adhesion of resin fixing.
Pack of 10.
Please note! This item is not available for export.
Petzl Batinox Resin Glue
Required for placing the Batinox anchor. Box of 10. Not available for export.
Petzl Batinox Resin Fixing Anchor
Petzl Bat'inox 14 mm resin anchor. Especially suited for soft rock. Textured stem for better resin application and adhesion.
Please note! This item is not available for export.
Petzl Collinox Resin Glue
Please note! This item is not available for export.
Ampoule Collinox Resin Glue. Required for placing the Collinox anchor. Box of 10.
Petzl Express Sewn Sling (Quickdraw Extender)
Petzl Express Quickdraw sling, supplied with a Petzl String which holds the karabiner in place and offers protection for the quickdraw end. Perfect for sport climbing, it is wide enough to grab on to. Available in three lengths to meet all your needs.
Setting up anchors is an important part of the industry and not to be taken lightly. At Abaris we stock a full range of equipment to allow for most site situations and the ability to test the safety and integrity of the anchors.