Singing Rock Profi Worker 3D Speed Harness

Singing Rock Profi Worker 3D Speed Harness

Key Features

• Singing Rock Speed quick release buckles on the waistbelt and leg loops for easy donning
• Wide well-padded waistbelt, leg loops and shoulder straps provide excellent comfort
• One-sided Easy-Lock buckle on the left shoulder strap provides smooth adjustment
• Sternal (front) and Dorsal (rear) fall arrest attachment points
• Ventral (lower front) attachment point for descender attachment and work positioning
• Lateral (side) and rear waistbelt mounted work positioning attachment points
• Singing Rock Cam Clean chest ascender attachment strap (Cam Clean sold separately)
• Loops on the shoulder straps for confined space / rescue spreader
• 4 gear loops each with a 5kg capacity
• 2 attachment loops on the rear harness webbing with a 35kg capacity
• 4 small attachment loops on the top edge of the waistbelt with a 5kg capacity
• 2 small attachment loops near the front of the leg loops with a 5kg capacity
• Slots on the waistbelt for the Singing Rock Porter tool holder Reflective piping on the waistbelt and shoulder straps for increased visibility

	W0082DR02	W0082DR03	W0082DR05
Size	S	M/L	XL
Waist (cm / in)	65-80 / 25-31	75-100 / 29-39	85-130 / 33-51
Leg Loops (cm / in)	45-60 / 18-24	50-75 / 19-29	50-75 / 19-29
Height (cm / in)	150-170 / 59-67	160-180 / 63-71	175-205 / 69-81

Different versions

Singing Rock Profi Worker 3D Speed Black
Singing Rock Profi Worker 3D Standard
Singing Rock Profi Worker 3D Standard Black

Accessories

Singing Rock Cam Clean
Singing Rock Porter
Singing Rock Franklin Seat
Singing Rock Franklin Seat Black

Cleaning

Wash and rinse in clean cold or warm water using pure soap e.g. Lux
soap flakes, Stergene liquid, at the approximate dilution, with pH range
5.5 and 8.5. Rinse thoroughly. 
+30°C / 86°F (max.)

Drying

Dry slowly in a well-ventilated place away from direct sources of heat or sunlight.

FAQ's

How do I attach the Singing Rock Cam Clean chest ascender to my Singing Rock Profi Worker 3D Speed Harness?

Each harness comes equipped with an attachment strap (normally located on the left gear loop):

1. Remove the attachment strap from the gear loop

2. Girth Hitch (Larks foot) the attachment strap in to the top attachment hole of the Cam Clean

3. Pass the hook of the attachment strap through the gap in the webbing between the sternal attachment point and attach the hook to the loop on the rear of this webbing

4. Fix a Delta Maillon through the webbing at the rear of the ventral attachment point and position it in front of the webbing

5. Pass the Delta Maillon through the lower attachment hole of the Cam Clean and screw the Maillon shut

6. Check correct orientation of the Cam Clean

 

 

 

Manufacturer's Downloads