Singing Rock Industrial Cows Tail

Singing Rock
Code:
From £17.89
(inc. VAT)

Singing Rock Industrial Cows Tail

The Singing Rock Cowstail is a pre-cut length of dynamic rope which can be tied to the main attachment point of a harness and used as an anchor lanyard (sometimes also called a device lanyard), as part of a rope access system. They are normally tied to give three fixed length lanyards; two long and one short. Available in 4m, and 5m lengths.

Full description

Description

Singing Rock Industrial Cows Tail 


Key features

  • 11mm dynamic kernmantle rope (EN892)
  • Individual serial marking
  • Thick sheath providing good abrasion resistance and longevity
  • Ultrasonic end sealing

 

Cleaning

Wash and rinse in clean cold or warm water using pure soap e.g. Lux soap flakes, Stergene liquid, at the approximate dilution, with pH range 5.5 and 8.5. Rinse thoroughly.  +30°C / 86°F (max.)

Drying

Dry slowly in a well-ventilated place away from direct sources of heat or sunlight.


 

Manufacturer's Downloads

Specification

Category

Lanyard Type
Cowstails

Rope / Accessory Cord

Rope Type
Dynamic
Diameter (mm)
11mm
Dynamic Rope Type
Single
Impact Force kN
8.2kN
Number of UIAA Falls
16
Sheath Slippage %
0.1%
Static Elongation
6.2%
Dynamic Elongation
34.1%
Length (m)
4m, 5m,
Weight per Metre
78g

General

Industrial or Sport Use
Industrial
Colour
Yellow
Conformity
CE EN892
Guarantee
2 Years
Wind Farm Kit
Cowstails