Petzl ASAP

Code:
From £174.00
(inc. VAT)

Petzl ASAP

The Petzl ASAP mobile fall arrester is the market leading back-up device for rope access systems. At moderate speeds, the locking wheel runs freely in both directions, following the user. However, when a rapid movement occurs, the wheel stops, pinching the rope between the wheel and the ASAP frame, thus stopping the user. The ASAP can also be used as a primary belay device in a fall arrest system.

Full description

Description

Petzl ASAP 


Key Features

  • Locks even if it’s grabbed by the user
  • Works on a taut rope
  • Clear instruction markings on the ASAP frame
  • Quick and easy to install anywhere on the rope
  • Works vertically or on inclines
  • Easy to unlock
  • Can be used with or without an energy absorber
  • Locking wheel teeth help to quickly engage the rope in the event of a sudden acceleration

Warning: the Petzl ASAP is a directional device and locks in only one direction. Positioning the device upside down on the rope could lead to death.
Please note: The ASAP is no longer supplied with the Petzl OK Triact Lock.

Compatibility

  • Use only with the Petzl OK Triact Lock karabiner 
  • Use the Petzl ASAP on low stretch conforming to EN 1891 Type A ropes with a diameter between 10mm-13mm
  • Meets ANSI Z359.15 when used with a Petzl ASAP’SORBER or ASAP’SORBER AXESS energy absorber, a Petzl Bm’D or Oxan Triact Lock (international version) carabiner, a Petzl Captiv positioning bar, and a Petzl RAY 12 mm rope.

Different versions

Accessories

Cleaning

Wash and rinse in clean water using pure soap
+30°C / 86°F (max.)

Drying

Dry in a well-ventilated place away from direct sources of heat or sunlight.
+30°C / 86°F (max.)


FAQ’s

Q. How do I unlock the ASAP once it’s locked on the rope.
A. Keep the locking wheel pressed against the rope and gently move the device upwards.


Take a look at the Abaris International blog for more information on the Petzl ASAP

 

 

Manufacturer's Downloads

 

Specification

Backup Device

With/without Absorber
ASAP Only
With Asap Sorber 20cm
With Asap Sorber 40cm
With Axess Energy Absorber
Rope or Wire Usage
Rope - Rope Access
ASAP Conformity
CE EN 12841, EN 1891 type A - Information
CE EN 353-2 - Information
EAC - Information
ANSI Z359.15 - Information
Nominal Maximum Load
128kg

General

Industrial or Sport Use
Industrial
Material
Aluminium, Stainless Steel,
Conformity
CE EN12841 Type A
CE EN353-2
ANSI Z359.15
EAC
Weight (g)
295g
Operating Temperature from
-20°C / -4°F
Operating Temperature to
+50°C / +122°F
Lifetime
Unlimited
Guarantee
3 Years
Wind Farm Kit
Back Up Device

Related video

Petzl ASAP - ASAP LOCK - Mobile fall arrester

Associated Products

Associated Products