Arborist Equipment

Irudek Forestry Oreka MIPS Helmet Kit

Irudek Forestry Oreka MIPS Helmet Kit is a multi-purpose helmet for use in a wide variety of different environments including Forestry / Arborist work.

• 1x Oreka MIPS Helmet
• 1x IruSecure 2C 
• 1x Safe 2 Flex 
• 1x Safe Mesh

Singing Rock Right Foot Lift Ascender

Foot ascender to improve rope ascending in rope access. Used in conjunction with Lift and Cam Clean. With a stainless steel toothed cam for higher corrosion resistance and for any conditions.

Singing Rock Left Foot Lift Ascender

Foot ascender to improve rope ascending in rope access. Used in conjunction with Lift and Cam Clean. With a stainless steel toothed cam for higher corrosion resistance and for any conditions.

Edelrid Apollo Arborist Throw Bag

Robust throw bag for rigging from ground level, filled with extra small steel balls. The non-use of lead is an ecological benefit. The outer material made of Cordura is specially sewn and extremely durable. The balls are also secured in an inner balloon in case the outer sheath becomes damaged. 

Kong Clack Magnetic Tool Holder

Innovative magnetic holster for harness, eliminates any snagging typical of conventional systems.

Kask Superplasma PL Helmet

The lightweight Kask Superplasma PL is a vented climbing helmet designed for industrial use and conforming to EN12492. The Super Plasma PL’s lightness is made possible by the high-density polystyrene insert, which absorbs impact forces. The strong chinstrap, which releases above 500N (50kg), ensures that the helmet stays on your head in the event of an impact. This makes it an ideal work at height helmet and also a technical rope rescue helmet.

Although the Super Plasma helmet has not been through the tests for EN397 (Industrial safety helmets), it uses exactly the same shell as the Kask Plasma AQ which has. The Superplasma therefore meets or exceeds the following tests:

-          Side deformation (LD)

-          Molten metal splash (MM)

-          Very low temperatures (-30°C)

-          Shock absorption

-          Penetration

Kask Superplasma PL Helmet

The lightweight Kask Superplasma PL is a vented climbing helmet designed for industrial use and conforming to EN12492. The Super Plasma PL’s lightness is made possible by the high-density polystyrene insert, which absorbs impact forces. The strong chinstrap, which releases above 500N (50kg), ensures that the helmet stays on your head in the event of an impact. This makes it an ideal work at height helmet and also a technical rope rescue helmet.

Although the Super Plasma helmet has not been through the tests for EN397 (Industrial safety helmets), it uses exactly the same shell as the Kask Plasma AQ which has. The Superplasma therefore meets or exceeds the following tests:

-          Side deformation (LD)

-          Molten metal splash (MM)

-          Very low temperatures (-30°C)

-          Shock absorption

-          Penetration

Harken Ninja MultiAscend Ascender

The Harken Ninja is a multi use ascender manufactured to be used as a chest ascender or hand ascender. The Harken Ninja is designed to be used with ropes of between 9 and 13mm in diameter.

The Petzl Vertex safety helmet has an adjustable dual strength chinstrap to cater for work at height, the Wind power generation sector, rope rescue and ground work. The 6-point suspended webbing cradle contours to your head and Petzl's Centrefit system keeps the shell centred. The Flip&Fit system helps to ensure the perfect secure fit and folds into the shell for easy storage. Shock absorption is achieved through deformation of the shell.

There is a complete line of entirely modular accessories and replacement parts.

This helmet was launched in 2019 and replaces the Vertex Best helmet.

Kask Quantum Helmet

The Kask Quantum helmet is designed for wildland fire fighting, technical rescue and mountaineering,  conforming to EN12492, EN 16471, EN 16473.

Kask Quantum Cabrio Helmet

The Kask Quantum helmet is designed for wildland fire fighting, technical rescue and mountaineering,  conforming to EN12492, EN 16471, EN 16473.

Kask Superplasma PL Hi Viz Helmet

The lightweight Kask Superplasma PL Hi Viz is a vented climbing helmet designed for industrial use and conforming to EN12492. It has fluorescent headlamp clips (not on the black version) and reflective stickers. The Super Plasma PL’s lightness is made possible by the high-density polystyrene insert, which absorbs impact forces. The strong chinstrap, which releases above 500N (50kg), ensures that the helmet stays on your head in the event of an impact. This makes it an ideal work at height helmet and also a technical rope rescue helmet.

Although the Super Plasma helmet has not been through the tests for EN397 (Industrial safety helmets), it uses exactly the same shell as the Kask Plasma AQ which has. The Superplasma therefore meets or exceeds the following tests:

-          Side deformation (LD)

-          Molten metal splash (MM)

-          Very low temperatures (-30°C)

-          Shock absorption

-          Penetration